Search results

If you raise the truck four inches, the first dock you come to will probably be three inches lower. Isn't that the truth. We did ours because of a tire size issue. Box was sitting too low on the tandems Dock heigth wasn't our major consideration Davekc

If you decide to go with the Mack, let us know your experiences. As mentioned, there aren't too many out there so it will be interesting to see how they do. Davekc

RE: Preparing to invest... but it isn't an investm Simple We had trucks at both places in addition to current driver information. Currently with Panther only as far as expediting. Davekc owner 20 years

Hard to tell as very few expediters run Macks. I personally have never owned one. A distant observation would be the issue of parts availability. It would seem somewhat limited. Cost of parts would be another consideration. Maybe some Mack owners can enlighten us on the differences. Davekc owner...

You are right. They probably can't explain the cost difference. Davekc

Most manufacturers of truck bodies have strict rules about adding anything to the frame rails to alter the body installation..... Especially raising the height..... He could have it done and then recertify it. Also, most boxes have a layer of wood between the frame and the box already. 4" does...

Cummins of Indy..........what a disappointing story. Usually when 1 hits this, there is another 100 behind you that experienced the same thing. Thanks for the experience.....I think? Hope you finally got it fixed Davekc

You are correct. Companies will lower their tariff rate. I had posted earlier, Landstar straight trucks were hauling freight off the docks in Laredo for well under a dollar per mile. If they keep doing that, these drivers will be out of business within a year. If they continue to run cheap...

As mentioned, tall tires and wheels will work but could be expensive. Raising the box is probably the easiest and cheapest, short of using ramps. As mentioned, most docks should be able to adjust to your setup. If you raise the box and feel some instability when loaded, you more than likely can...

As mentioned, you really have to shop this. Many things will affect the rate and coverage. Age of truck Age of driver and experience (driver must be 21 for interstate) type of liability and coverage haz-mat considerations (expensive on a single policy) And of course.....driving record Hope that...

Rich is correct. These floors seldom last past 4 years. Replacement depending on the box size is roughly $3,000 It is a major expense to have a box refloored. Very labor intensive with project completion in 1 to 2 weeks. Depending on circumstances, one must figure lost revenue for that downtime...

What also is a surprise is pending legislation for addition fuel tax in many states. Some like AR want to add another .05 cents per gallon. Hopefully those bills won't pass. Probably another reason to join OOIDA They seem to be the only ones fighting this. Davekc owner 20 years

RE: Fuel price higher in w. TN due to broken fuel We are very active in the stock market and I can tell you that they are turning huge and record profits. Pick up a copy of WSJournal and they are cleaning up. Davekc

> > > WHERE TO BUY YOUR GAS, - THIS IS VERY IMPORTANT TO KNOW. > > READ ON-- > Why didn't George W. think of this? > > Gas rationing in the 80's worked even though we grumbled about it. > > It might even be good for us! > > The Saudis are...

RE: Fuel price higher in w. TN due to broken fuel Memphis news (Fox13) said there was a secondary issue with one of these refineries. Should be repaired in six weeks according to their report. Sounds like another reason to gouge the customer. Watch for refinery problems in other regions. What...

It is great to see some movement in the area of driver compensation. It is clear that all carriers are going to have to address this issue. With large increases in fuel, operating costs, and inflation, rates will have to change. As these costs keep climbing you will see many drivers leave the...

When using the rv dealer, have them run a meter on your connection. Sure fire way to make sure you have the right gage wire. They do this all the time and the service is usually free. Davekc

If you really like your sleeper and it is not the one piece shell from AB, take the sleeper off, and reinstall on a new chassis. We have done this several times on different trucks with good results. Then take your chassis and sell it. Turn it into a flatbed or tow body, and make a few more...

RE: Preparing to invest in a new truck & team. Adv I agree with the above advise. Never borrow against your home, especially on a depreciating asset. Not aware of any trucks that increase in value? Another example of demise would be that you have the truck for a year and it is totaled in a...

Both new and used can be a tax deduction. To have a tax deduction you must have an income from which to deduct. Based on some recent posts, just generating the income could be a problem. Davekc owner 20 years