Search results

Aren't the 'normal' ones around 600 hp?

Does your mechanic have a scan tool that can read engine codes and see live data? What year is the truck?

Did this happen all of a sudden or did these symptoms coincide with some event? FYI, engine data is pulled from the 16 pin connector. I don't know what scan tool you're using, or whether it's compatible. The injection timing is not adjustable. If you disconnect the mass airflow sensor does...

Do you have any backstory on it? Any event that coincided with this symptom?

Did the ground wire from the battery to frame break? Send me the VIN if you can

I don't have a definition for that code, either. Weird. Are there any symptoms besides extended crank? And how extended is the crank before starting?

We don't have this model in the US so I don't have any parts info for you.

One of our customers has an older Mitsubishi. Its got around 650k miles. It runs great. The problem is that they are much less common than other trucks, so you might struggle to find competent mechanics to work on it. I spent several hours replacing all the brake lines with Nicopp tubing because...

I recently worked on a truck with a leaking fitting on the fan clutch. You couldn't hear the large leak over the engine noise, but when you cut the engine off the fan clutch solenoid turns off, stopping the leak. With the engine at a low idle the compressor couldn't keep up with the leak, so...

I'd check the brake switch adjustment first. Its super easy to check and it can cause an instant power-no power situation.

Was this problem resolved?

The first thing I'd check is the brake pedal switch.. If it's out of adjustment it can intermittently cause no power. If you're flooring it, it could go from no power to full power in an instant. When the brake pedal is released, the plunger on the switch should be fully depressed. If it's not...

Are you experiencing something similar?

There is almost certainly a burner problem. Burner and DPF health is tied directly to injector health. The injectors do not last forever.

Unfortunately Australian Hinos aren't models we see in the US so this isn't something I have any knowledge of.

The hose collapsing has nothing to do with the throttle body. The restriction is upstream of the hose. That leaves the intercooler, air filter, and turbo as suspect.

Its almost certainly a burner issue. It is unlikely to be computer related. Since they've been putting Cummins engines in Hinos, there's been no more training on burner trucks. Good luck finding someone who knows how to fix it. Send me a pm.

Sorry, I've been busy. There is definitely a restriction in airflow somewhere upstream of the intercooler. Sometimes the hot side of the intercooler gets full of goo. You can look inside with a mirror. It could be that the air filter is super clogged. One of the first things I'd look at is the...

Good question. Those parts are made by meritor. I don't really know, I reuse the fittings when I make brake lines.

Pull up the floor mat on the passesenger floor and see if the insulation is wet. If it is, the windshield seal is leaking. I often find them leaking from the upper right corner.