Search results

  1. T

    Source for Sprinter Parts & Supplies

    Hi all, This may have been noted before....however one of my clients has 3 Sprinters and found a source for parts/supplies that I wanted to share with you all. www.europarts-sd.com located in San Diego has a good selection of things like filters, brake pads and other heavy stuff...
  2. T

    CDL Online Help - Worth the money ???

    Leo, Great info...I knew coming to EO would be always be a good start... Frank in Pa. "The Beast in the East" P.S.-I may be looking for a ride when I'm done...got any seats open ? trucks
  3. T

    CDL Online Help - Worth the money ???

    John, Thanks for the quick response...and the helpful info "The Beast in the East"
  4. T

    CDL Online Help - Worth the money ???

    Hi All, I've finally decided to get my CDL (after all these years)...and today I went down to get my paper work setup.... Has anybody ever purchased or used the companies online that sell help to pass your written test (i.e. www.cdlexam.com) ?????? Are they worth the money ???? My CDL...
  5. T

    2007 Diesel Engine Compliance

    Hi all, I thought I'd start this thread to get some insight and offer what I know as to the new requirements for 2007 Diesel engines... I'll speak to what I've been told by my reps in the Class 3-7 trucks (i.e. Ford, GM-Isuzu and Dodge) The big question is what the manufacturers are going to...
  6. T

    2006 SPRINTER

    Hi, I believe the owners manual calls for a 15W-40 weight oil...you may want to look that up.... And on the subject...many of you are sold on synthetic oils like (m-1) But in the recent Aug-Sept Land-Line magazine there was a great article indicating that you really have to look what your...
  7. T

    In the hot seat

    I'd get this looked at ASAP....especially if it is getting as hot as you say ...(i.e. can't touch it)...... Early 2005 models had some "frame grounding" issues...but thats all I've heard and seen Remember these units are assembled in Germany ...and then dis-assembled partially and transported...
  8. T

    2006 SPRINTER 2500

    Send me your specs....I'll see what I can do Frank "The Beast in the East"
  9. T

    Anyone with a cube van?

    You are correct.... BTW, Ellenbaum in Michigan has an 04 Chassis with 14' box van for sale on truckpaper.com Frank "The Beast in the East"
  10. T

    Anyone with a cube van?

    You could move the PA (just kidding) Supreme says the weight go up 300-400 lbs...as you are now a wider unit (since you are a duallie) I just did one for a customer and he was at 1700-1800 for the duallie How about a Sprinter chassis cab with a 14' Spartan box with a crew box added before the...
  11. T

    Anyone with a cube van?

    Here in Pa...you can register a vehicle at any GVWR down to the actual weight of the unit. The upffiter will supply you with a 2nd stage MSO and a weight slip....but you are not bound to that ... I regularly register our wholesale parts trucks (16' cube Isuzu NPR's) rated at 12k GVWR...to 9990...
  12. T

    Anyone with a cube van?

    Supreme says the SRW Spartan body at 12' is around 1400 lbs. Using your numbers on the chassis (5000 is about right) you have about 3100 lbs to play with (don't forget fuel an driver).... It would be close.....at 9600# GVWR.... Hope that helps "The Beast in the East"
  13. T

    2006 SPRINTER 2500

    I have several clients that have found the upgraded seats with the air-operated lumbar support....work pretty well.... Check a Freightliner or Dodge parts dealer for pricing.... Just my 2 cent worth !!! Frank in Pa. "The Beast in the East"
  14. T

    2006 SPRINTER 2500

    You might want to check out the classified page here .... I guy in Michigan is selling a 2005 unit...all set up...with about 30k on the odometer..... You'll be saving about $8k over a new unit...and it's virtually the same truck as an 06...... I'm considering the unit for a client of...
  15. T

    Anyone with a cube van?

    Just a quick note Supreme does offer a crew-van product on its cutaway Spartan series... I believe they have a picture on the website www.supremeind.com It primarily designed for hauling personnel to construction jobsites...I've sold a few to commercial painters and drywall contractors. The...
  16. T

    Be Advised Driving in PA

    I apologize if this was a true hoax.... What prompted me to send it was the author actually signed his name and phone number to the e-mail (I guess he may be in trouble). The trucking company is a fairly large carrier out of Pittsburgh....and given the way our governor (schmooze Rendell) ran...
  17. T

    Be Advised Driving in PA

    Gents (and ladies): Be advised I recieved this from a reliable source: Emailed to me as follows: Subject: Warning to PA residents regarding speeding PA State police will launch a 30-day speeding ticket frenzy throughout the state starting Feb 1, 2006. The State estimates that 22 million...
  18. T

    Morgan bodies, personally not recommended

    Thanks hope it all works out.... Just as a side note.....I try to take ownership of the complete process on the vehicle for the order....as a dealer we deliver a complete vehicle...and my motto is: "If I ordered it...I get it fixed"........... Missing E-tracks was a biggy...in my book...since...
  19. T

    Morgan bodies, personally not recommended

    Just curious but did you contract with Morgan directly ? Or did you buy the body as part of a complete unit from the truck dealer ??? Really the best way.... If the later is the case..then why did the dealer not handle this for you....????? Or the distributor ??? Sounds like the quality of the...
  20. T

    Purchase vs Lease

    Hi, Since I'm the guy who got this idea of leasing started...I'll work up some numbers at the office tomorrow and post them.... For the record...I'll be using a TRAC lease option and a conventional loan as examples.... TRAC leases (Terminal Rental Adjustment Clause) are really only way to...
Top