Search results

This is the mounting bracket I fabricated for the engine oil bypass filter. The bracket mounts at four points - the two vertical straps mount to the HVAC ducting/cabin air filter housing studs, the strap going to the left mounts to a tab with a hole in it on the body located near the water valve...

I've heard tell of it - it's interesting ...... I suspect that the reason the auto makers went away from it was probably due to wanting to be able to sell something which required much less maintenance - although it's really quick and easy. Of course, the other aspect of it is the public...

Re: Filter, Internal You're quite welcome. There's alot more to it .... I have some more photos that I was going to post .... but I got called @ 08:30 this morning with a load ...... so I had to stop for the the time being. I'll post the rest of them as I get a chance. I don't know about...

Motor Guard Filter Element, Rear Backside of the label - notice the rating - down to 0.1 microns. The only real downside to using one of these setups on an internal combustion engine (particularly an EGR diesel) is you're gonna have to change the filter much more often that you would with a...

Motor Guard Filter Element, Front I have a Motor Guard M-30 on my plasma cutter up in the shop - this is a replacement Motor Guard filter element for it - looks familiar ..... other than being brown (...... guess the other stuff is white so ya can tell if need to keep on wipin' ..... or if...

Filter, Internal Below is what the insides look like, along with the standard filter element that Ralph recommends :D Some of the internals on a stock unit are plastic (polyproplene), because in an air filtration-only application they don't get all that hot internally - different story with...

This is the modified Motor Guard M-30 Bypass Filter. Ralph (Wood) does a number of mods to them to make them suitable for use in lube systems as a bypass filter ...... one of the things he does is remove the epoxy paint that they come with from the factory (inside and out) - because the epoxy...

Whenever I need to ..... before, during, or after ..... Last night I went to bed at around 18:00 or 19:00 after I dropped and grabbed some chow .... I slept straight-thru until 05:15 ..... Never. Only reason I'd ever be likely to spend the coin on a motel is if the truck was broke down...

Pilgrim, I'm going to give you a detailed respond to your post above - but it's probably going to take awhile - because dealing with the actual truth of the matter doesn't lend itself to broad, generalized statements - it requires specificity - looking at all the facts in regards to the situation.

Yeah ..... faulty glowplugs could do it in that kinda of weather ... :p Ya thinking about having them try and replace them ? If so, I'd make sure the motor is fully warmed up and hot when they try and remove them ..... Yeah ... that shouldn't be too bad .... the WP is about $180 list from...

Ya gots the magic touch ..... :D So what was it ? (Is it real cold out there now ? Treating the fuel for gelling are we ?)

Yeah ...... ya just might be right about that too .... :rolleyes:

I'm down with it ..... (imagine that - we agree .... :D)

Well .... I dunno there Pilgrim ..... seems like he might just a little better informed on what's going on over there .... than some expediter in the Midwest: "During the Barak Government, he worked in the Israeli Prime Minister's Office as special adviser and head of Jerusalem Affairs...

Absolutely !!!! Nothing wrong with that all. Sure, you bet !!! (BTW, nothing in the story I told above was really aimed at you - my reply to you however offered the opportunity to tell it though .... and flap my gums a little more .... :D)

I dunno ... I'm not sure that the intention of the original poster was to demean a particular race ...... in fact, it might have been quite the opposite ..... maybe to make the point that you raise below - in response to some of the other crappola that gets posted on EO ...... dunno ...

I dunno .... mebbe one that had to pee rather badly ?

Well, Mr A. ....... it's never too late for a change .... if you feel so inclined ..... I didn't know nothing about bypass filtration really, until maybe 12 months ago ..... when I started reading up on it (the real beauty of the internet and places like EO and BITOG, is that they allow you to...

Yeah ... it oughta be ready by then to get a good idea of what's going on ...... Read this and see if it helps: http://www.expeditersonline.com/forum/web-site-support-services/34029-how-do-i-separate-quotes-responses.html#post275897

Dan, The company that makes the Motor Guard filter housing is here: Motor Guard: Air Management The unit that I am using is an M-30 - which is ideal because the inlet and outlet are plumbed thru the bottom (which makes it self-draining and very clean when you go to change the element) When...