Search results

I'm pretty sure there's a blown up one languishing in the lot at work. I'll stick a magnet on the door tomorrow.

http://i.imgur.com/kDjnAQu.gif

Please tell me that Rand Paul, Chris Christie, and Jeb Bush aren't the only worthwhile candidates the right can dredge up.

Hi there. First, I've never seen a damper or pulley fail. But anything is possible. Remove CAC hoses. Drain enough out of the radiator to take the top radiator hose off of the radiator. Get a 55 gallon drum and a couch cushion or something, and set it under the hood. Remove bolts from the...

Re: Headlights on buzzer... Just let me know when you're coming! I think my best time on a head gasket r+r is around 16 hours. There's a guy working here who is also very good and he can do it a little faster. This is including doing injector cups, but not taking both manifolds off and...

What year and model?

Re: Headlights on buzzer... The most important thing you can do is to periodically do a thorough cleaning of the radiator fins. To be thorough means to remove the intercooler. The fins of the radiator get packed full of junk and it'll seriously interfere with airflow, and you can't see this...

Those things are supposed to be able to withstand some incredible loads.

These two questions I don't have the answer to offhand. Can you take a pic of the numbers on the TCM, the connector, etc and post them? I have a couple of TCMs hanging around (with known faults, they're just for testing purposes), and if one happened to match up, I might be inclined to send...

Re: Headlights on buzzer... Every time I tell one of y'all to take the truck to the dealer, I'm crossing my fingers that you won't get screwed over. That is ridiculous. I mean, you can fit an impact wrench in there and just zip the balancer right off. It ain't rocket surgery.

No, but the speedo cal will get thrown off. It is able to be recalibrated. Since the speedometer is already off, I'm curious. What's the vin?

Re: Headlights on buzzer... Daytime running lights are an option. They are set up to turn on and off with the parking brake. Speaking of brakes, here's a pdf. Page 2 shows a brake schematic. http://www.suspensionspecialists.com/techinfo/Bendix_Brake_Handbook_2009.pdf Back to DRLs. Remove...

The pressure tank sensors are for the two air gauges. The 5v you are seeing is reference voltage.

The link I posted showed the two air tank pressure sensors that provide the signal to the two air pressure gauges. The low air pressure light and low air pressure warning buzzer are two separate pressure switches on the parking brake valve. I'm pretty sure the buzzer will only go off when the...

Is this the parking brake valve? The service brake relay valve also has a pressure switch on it (well, sometimes). Just to make sure we're on the same page, we're looking for the valve that provides air to the spring brake chambers but not the one that controls the service brakes.

The driveline angle will not change. It WILL turn the ABS light on, which is a problem not to be taken lightly. You'll need the same tire on each axle. Total tire diameter is what's important. One of those calculations above showed the difference in switching to a 41" tire. It would only be...

to answer the other wiring question:http://i.imgur.com/d434F9z.png?1

Ooh, red flag. The temp sensors can be difficult to unplug. Yanking on an already delicate wire connector could have finished it off. Tech tip 09-006 addresses this issue. If possible, have the dealer who performed the 8440/8510 recalls do this work. If they screwed it up, it's their...

Right in front of the rear axle.

I meant the relay valve, for the spring brake chambers.