Search results

  1. U

    2008 UD 2600 J08 Iddle issue

    I’ll check on that since after the truck warms up works fine it’s only when the truck is cold that it does the issue
  2. U

    2008 UD 2600 J08 Iddle issue

    Hello Hino123 i changed the Maf for a genuine hino and nothing change the engine starts up fine after two minutes Rpms start decreasing and the engine won’t rev even if you press the pedal
  3. U

    2008 UD 2600 J08 Iddle issue

    Thank you
  4. U

    2008 UD 2600 J08 Iddle issue

    Thanks for the response i will monitor the injection quantity when cold also injector balance. And i will try another MAF I suspect the egr valve but i will Digg in and come back once i test everything let me DM you my email
  5. U

    2009 UD2300 with the J08E engine. Loss of power

    man i am in California and this is the only UD with hino engine i had to get the software because is rare the shop that has it
  6. U

    2008 UD 2600 J08 Iddle issue

    Hello thank you for the response yeah its a weird issue the truck has about 500k but it has new injectors new pump with new scv i have tapped on the side of the scv but no change and the issue is only when the engine is cold starts fine about 1 min warming up the engines Rpm start dropping and...
  7. U

    2008 UD 2600 J08 Iddle issue

    Hello everyone i have a 2008 ud with J08 and the problem i have is when the truck is cold in the morning starts fine after like q minute of warming up the engine Rpms start dropping and the truck wont accelerate and there’s black smoke coming out the DPF the weird thing is if i start the truck...
  8. U

    2009 UD2300 with the J08E engine. Loss of power

    Looks like the same issue i had with my UD do you get a check engine light? I use to have power loss and ended up being injectors fix that and a couple days later my HPFP went bad after that the truck works fine where are you located i have the ud software
  9. U

    Hino jo8e 1/2 throttle problrm

    You need UD Data Link software to scan the truck and see what codes you have registered Check if the ITV isn’t stuck or any clogged fuel lines maybe bad scv or bad turbo
  10. U

    08 ud j08 p0087 c

  11. U

    2008 hino 268 no power rpm surging!! Help

    You should check if your ITV is drilled also check the scv valve if you have the updated part check banjo fittings and fuel lines maybe clogged
  12. U

    2008 hino 268 no power rpm surging!! Help

    Hey Greasyshirt thanks i found the elbow on the tank clogged but i had replaced scv and fuel filter before trucks runs good now
  13. U

    2008 hino 268 no power rpm surging!! Help

    Hi haven’t posted in a long time i an having a issue on a 2008 hino 268 have no check engine or codes the truck lost power and you start accelerating the truck surges and you floor it and it wont go i do have an ABS light on was givinv R wheel sensor circuit changed that Now i get 2-2 and its...
  14. U

    Mechanical Regen issues

    Hey thanks gredytshirt i replaced the 7th injector and installed the new dpf because the old one was really bad and forced a manual regen and that fixed the issue thanks for the help
  15. U

    Mechanical Regen issues

    Thank you greasythsirt I will check that i will also get the dpf baked it need cleaning at 155k almost there
  16. U

    Mechanical Regen issues

    Hi i know this is a hino thread i have a 2012 UD 2600 it doesn't have the j08 engine but the regen is flashin and the soot level is high I've done the manual regen and the exhaust temp lights flashes any idea on what could it be ?
  17. U

    Ud 2600 ecu question

    Thank you for your response i will check the turbo well the dpf filter was cleaned and baked about 4 months ago the tailpipe is clean i will check the turbo this is the ecu it has
  18. U

    Ud 2600 ecu question

    Thanks for the answer yeah its a manual 6speed i will try to find a ecu to test maybe this J08E-TV they put on the UD came with some bugs that we have been fixing they did change the injectors when it was under warranty but not since then i will try with the injectors the trucks run fine after...
  19. U

    Ud 2600 ecu question

    Because there is not alot of UD support with scanners and the dealers here have more HINO support and maybe they can remap my ecu since i have the 2008 model it came with alot off issues including the un modified ITV and creates alot of soot
  20. U

    Ud 2600 ecu question

    Hello i was wondering if the 2008-2010 hino 268 ecu would fit my 2008 UD 2600 ? I know they share the same engine but i think UD blocked the ecu so only there software computer could diagnose the truck ?
Top