Search results

It has not gone into limp mode. The light is currently off. I do have trouble telling what the fluid level is. There is oil on the dip stick. It seems one side of the dip stick will have more oil on it then the other side. There no fluid under the truck. I assume there no leaks. I think...

Thanks Greasyshirt. It is Allison 2500rds. No fault codes on the display. Sent from my iPhone using EO Forums

I’ll check and see if it triggered a fault code. Sent from my iPhone using EO Forums

Yes it is Sent from my iPhone using EO Forums

Yes. Today it was wet snow. Sent from my iPhone using EO Forums

The new sensor worked and was easy to replace. Hino sells them for over $100. I saw others that look the same for about $30. I went with the expensive hino one to be sure it would work. Sent from my iPhone using EO Forums

The transmission light will come for a short period. Usually just a few seconds. Has happened three time. Fluid level seems good. It is 2016 hino 268 with hooklift. Is this a common issue? The dealer can not see it until Wednesday. Sent from my iPhone using EO Forums

Greasyshirt always comes through!! Thank you again for your help. I will put in new sensor.

Hope this is any easy fix! The water in fuel filter light came on. Replaced the Davco paper fuel filter. The light went off and came back on. Drained lots of fuel from the water separator and replaced the fuel filter again. The light will not go off and there are no codes. I have not...

Snappydave. I have the same coolant leak. How did this work out for you?

Greasytshirt I need some help. Losing transmission fluid but can not find a leak. Is it common to leak into the radiator when cooling? No lights have come on. It also leaks coolant from behind the turbo. Difficult to get at. It's a 2008 with about 280k miles

Thank you for all the tips and posts about Hino's. I have 2008 268A with 160,000 miles and would like clean the dpf filter. My local Hino dealer does not do this and will have to send the filter out. That will take to long. I would like to remove the filter myself and drop at off a shop...