Search results

I won’t be fixing it after all. I came in this morning and it was headed to the hino dealer.

Wow thank you for that information on the connector. I’m pretty sure that’s what we need as my snap on connector is opposite. I have been doing a lot of research on those sensors and most have said change in pairs. But at 600$ a piece I don’t want to just throw parts at it. I have done that...

Today i was able to take a few minutes with my scanner (snap-on pro-link ultra with hino software) and check out the codes and the only codes it has was a active code for low air pressure in the air tanks, and a inactive code a P207F which said malfunction with Adblue solution. which i know...

Alright so this truck comes in and supposedly it’s been to other places for this same issue. It says to change def with normal with engine off key on. So I did that and changed the little def filter in the pump and the fuel filter for the burner. I drove the truck for 30 minutes and all seemed...

Well after looking at all the wiring, i went to the 5 amp fuse and sure enough it was blowed. Im thinking the sensor may have shorted out and thats what blew the fuse, or maybe it was blown at the other shops its been to for this issue. replaced the fuse and plugged everything back in and the...

Ok that makes some sense as to why it ran to the u2 ecu now, I spent almost a hour following the harness the best i could through 3 connectors, and ended up at the junction box there on the right side, where it looked like it went to a grey connector and then just passed right back out and went...

I have a 2012 Hino 268 in the shop with the common no power on take off and I believe i have found my issue. I started by changing the brake pedal switch and the 3 pressure switches on the service brake relay and parking brake relay valves, well that didn't fix anything, So i went back under the...