Search results

Carefully pull the plastic cover off the gauge cluster, remove the gauge cluster, check and clean the plug and pigtail connectors with silicone sprayed on a rag, plug it back in and reinstall. Its all plastic so be careful not to break anything and don't drop the cluster its an expensive part.

But the music fixes the noise that needs repairing. L.O.L.

You are pulling quite a few amps and it is possible to affect MPG as everything runs through the battery, even the E.C.M. Do you have an amp meter installed to measure the draw? You might want to install a second battery make sure its wired parallel just like jump starting pos. red to pos. red...

You REALY, dont want to remove the roof yourself the roof holds the walls together like an airplane fuselage if you have the slighyest breaze, the outer walls will will likely colapse and you will have a flatbed. If its leaking at the pannel seams and allong the top rails, or corner caps...

I always recomend cutting your teeth with local delivery companies for at least six month to a year. That way you will learn the business and how shippers and recievers think. Also it will give you an oppertunity to decide if you want to work on getting your own Motor Carrier authority or work...

I guess thats why I still like genuine European cars before they become Americianized. No cup holders, ashtrays, power ports/ cig lighter, not even a radio. Because the concept is you have enough work paying attention to driving. I have always belived that pain should be the curency for...

Anybody hear about this last week? Schumer: Chicken processed in China and sold in the U.S. poses 'major health hazard' for Staten Islanders and other citizens | SILive.com Yahoo Shine - Women's Lifestyle | Healthy Living and Fashion Blogs

Looking for a new laptop but I prefer windows 7. I cant seem to get the hang of windows 8 its like a bad MAC coppycat program. If I can find a decent laptop I can have my computer geek friend change it up.

Desktop at home is D.O.A. and the laptop bakc light is inop. My computer geek told me I can build a Frankenstien by plugging the monitor into the laptop. It works, but I dont see myself lugging the monitor arround on the truck. Knowing my luck Ill get shaken down suspected of boosting a T.V...

Last time I stayed at a Holiday inn I had a hotel lizard knock on my door offering room service. I usualy haunt Motell 6 Bob Wolf.

Nope, I didnt discover the truth abbout Jimmy Hoffa, or get too close to hangar 18 in area 51, or come to my senses and find a profitable career. I had the death touch for my computers the past few weeks thats why I havent been arround. So I will be available for now to help some, annoy...

Check your max G.V.W. that van weighs arround 8,500 lbs empty. After you add a bulkhead, build a DOT LEGAL sleeper 300 lbs, your gear, supplies, equipment 500 lbs, a driver 250 to 300 lbs, and dont forget a full tank of fuel at 35 galllons of fuel annother 350 or so lbs. 8,500+ 300+ 500+...

Proper Response? He didnt need to try picking a fight with Syria... The correct response is they have been at war for the past six thousand years, if they wanted peace they would have achieved it by now, and he should have opted to stay out of it.. Trust me he is no J.F.K. as J.F.K. said...

Ive asked them for change a couple times. Bob Wolf

I would consider one if CPM makes sense. I drove an NV 1500 and for the size theyre easy to drive and comfortable. However the one I test drove only was good for 1/2 ton. A also spoke with a local comercial/industrial plumbing contractor and he bought a 2012 and has no intention of going back...

I rented one a couple times when my S/T was in the shop for the 1 or 2 skid jobs. GVW is under 12,500lbs You can only scale arround 3,500 lbs max on the newer ones, and they get betwene 8 and 9 mpg. Hell I average 9 to 10 MPG with my International S/T with a DT 466 and scale 10,000 in a 24...

I prefer a well placed broad point myself. In fact, my friend can run 332 feet per seccond.. Can you?? Bob Wolf

The one I have I bought at Napa looks like car and light truck spacing I think I might need a larger one for trucks. Ill admit I am often accused of being a cheapskate, but its the principle of at least attempting to be self sufficient and although Im not a greenie tree hugger I do belive in...

I use an old school radiator shop in Rochester Ill stop by at the end of the week. They have been arround forever and even do recores and custom work. Zorry mentioned a tool truck should have the right size fin comb. Ill give that a try too. I dont want to replace a condensor that otherwise...

I tried the window screen, dose slow the airflow some but Temps are better, still up but dont go past 200 deg.F unless the throtle is flat to the mat, better than 210 so long as I keep the rps arround 2000 or lower. I might be looking arround for a new AC condensor I abandoned the idea of...