Search results

As part of the deal with the company I'm subcontracting to - IFTA filing is up to me even though they pay the fuel. So running two trucks strictly in WA and BC, (mostly BC) all fuel purchased in WA state at a CFN station, all miles recorded in each jurisdiction for both trucks. Do I need...

Saw a Stoops Columbia from FECC in the border line today, was it anyone on here?

http://www.gearmaster.com/1.html Some may have heard of this and I know some say its a waste of money but I went ahead and got one. I looked at it this way, I could pay someone to teach me and have nothing afterwards or I could buy this and have something left over in the end that I think wil...

Amazon.com: I Love Ifta Party Decoration Necktie: Apparel

Was watching the battle of Alberta last night and got to thinking, Roloson's mask looks a lot like Grant Fuhr's, then noticed the pads and glove. A google search proved it correct - To go with the retro 3rd jerseys, Roli is sporting Grant Fuhr Replica mask, gloves and pads. Very cool stuff.

While getting some extra keys made for my T300, I discovered that you can insert or remove the ignition key in any postion, on - off - assy, engine running or not and when running it keeps running and supplies normal power with the key removed. Could be handy at times I suppose.

Just looking at the mirrors and noticed that while the main mirrors are heated, the spot mirrors under them are not. I was thinking of getting larger 8" spot mirrors and moving the smaller spot mirrors to the top since its nearly impossible to see the upper part of the box. If I were to add...

Just installing some plywood and e-track and noticed the front corners have a 6-7" section (betwen the yellow lines) that is left open - you can see daylight, there is about a 1/2" gap. Is this normal or should I seal it up?

Is there somewhere I can find general specs (seems to be very little on cat's site) and/or does anyone know if all 3126 models have the same max governed rpm? Just setting up a Gearmaster and I'm not sure if they are all set for 2400. I know some say waste of money but having never driven a 10...

Just curious if anyone has seen one?

I'm going to be removing these slats and install plywood/e-track. I see at the front corner there isn't vertical rib and the slats extend out past the first rib. So when I go to install the plywood and e-track should the e-track also exend forward of the first rib and then add an aluminum L...

OK, I got this late model wheel I want to swap on the T300, on the new style ones the cover just pulls off to gain access to the hub. How do the older ones come off............just pull? And will I need a steering wheel puller to get if off or ?

Went by the dealer today to complete the purchase of an 03 T300 and inadvertently gave them $500 too much of a deposit. No biggie, I'll just make it easy on them (don't have to process a refund) and spend a few bucks more and get one of the many seats on sale in their parts department. So I...

Got a pretty good quote off State Farm for my two (1 ST, 1 cutaway) but apparently (agent is checking) they don't offer cargo. Right now I'm looking in [ Part 387: Minimum levels of financial responsibility for motor carriers ] and it makes no mention of cargo requirements, only liability - am...

Is it usual for a quote to vary wildly one company to the next? Had a quote through a broker for two trucks (1 straight, one cutaway van) for $7900 (which then went to $8250) but decided to check around when they jacked the cargo portion up and down. Today I got one from State Farm (who I have...

Can anyone recommend some IFTA software for 1 to 3 vehicles that: *is easy to use *doesn't cost a fortune *preferably fills out the return for you

I need to get some E track and it seems online and locally they only have it up to 10" lengths yet I'm pretty sure I've seen it (installed) in full lengths - ie: 24" van has a single 24 span for each row, my truck has F track with a full length single span. I know this is mostly for shipping...

There was a thread about chains not long ago and I ran across something called snap-on chains. Trouble is they only come in either 5 or 9 bar models. While watching that video again on youtube I spotted this tool that looks to make chain installation quite fast and easy for either singles or...

I want to convert this vertical stack to a horizontal. If I add the frame brackets can I remove and reuse the vertical muffler by adding a straight or flex pipe to connect to the cut pipe and add a 45 degree outlet or will I need a new one?

Anyone recognize this CB mount, who makes it or where to buy one? Or anything similar?