Search results

Didn't make it truck broke down at pickup. :(:mad:

That you can do 70 on ice and not slide off the road:eek:

Heading out to Wilmington, Ohio

Yes, my lease is "the piece of mind plan" LOL To tell you the truth, I think any class 6 truck is gonna need work at 200K. I might be wrong but my last job had plent of problems with the Freightliner M2 and before that the International. These class 6 trucks are only good for about 350 to 400K

Got may truck back finally, It's nice to be in my truck and I made it home 22 miles with no problems lol. It now feels more powerful, probably due to new injectors and turbo.:) I hope the next 150K is trouble free, the first 194K was fairly trouble free up until this last problem.

I resemble that remark:p

Being blown all over Indiana today winds up to 70mph :eek:

Sorry to rain on your parade, but the info about butter vs margarine is not all true, so of it is, some isn't goto Snopes.com to take a look

not much room to manuever a pallet jack, some place you can use the dock if they have the plate that goes lower, not all have that though. I used a pallet puller, it worked well, although floor got scratched and gouged

Other than Walmart does anything actually come out of arkansas LOL:rolleyes:

Means less open weigh stations most likely

Okay, got an update from Penske Replacing all the injectors, the rail, the fuel pump, fuel filter, the turbo, the oil cooler and a most of the fittings on the fuel tanks. Might be a couple things I forgot:eek: I'll have a new truck when they are finished Hmmmm

I rarely exceed 2500 rpm in my truck also. Actually, I can't exceed 2500 and 3000 is redline:eek::rolleyes:;)

Anyone notice E-1 is hiring on daycab straight trucks?

Too bad it didn't happen at Panera free lifetime coffee:D

We had a terrible situation here in Fort Wayne this morning, snow started falling about 6:30 and quickly turned the road into an ice rink, 2 jack knifed semi's 5 or 6 roll overs and a couple dozen slideoff's. It's like everyone forgets how to drive in the first snow fall. Meanwhile i was...

Garmin tells you the side of the street, but is not always correct. Does the Cobra have lane assist?

It looks like a garbage bag over your arm(or a really skinny leg) held on with duct tape:p Looks like someone's trying to take a shower and not get the cast wet Hmmmm

Really goes to show how tight the job market is getting, Schneider was the revolving door of trucking

I was a member of Pumpkindriver, some 5 or 6 years ago whn I was unemployed and looking at trucking. I was thinking of getting into the Schneider Walmart Dedicated since I live 25 minutes from the Garrett, In distribution center. Sometimes I wish I would have taken that job and I'd at least...