Search results

Anyone know the severity level of a loose or unsecured load violation? Sent from my VS910 4G using EO Forums mobile app

Got mine out without removing the hood, tight squeeze but possible Sent from my VS910 4G using EO Forums mobile app

Or some bungee cords and duct tape? Sent from my VS910 4G using EO Forums mobile app

I was told by a dealer tech that the pig tail plastic was a tad thin on this plug and thus the over heating issue, after I cleaned the terminals and coated it with high temp silicone I've had no issues ( but still have an expensive back up fan just in case of an emergency ) :( Sent from my...

Seemed like a good decision at the time but now I have a back up? Sent from my VS910 4G using EO Forums mobile app

Left to right, black, big blue, small blue Sent from my VS910 4G using EO Forums mobile app

A few of you truly need a course in optimism! Sent from my VS910 4G using EO Forums mobile app

Ouch Sent from my VS910 4G using EO Forums mobile app

Looks just like mine, my harness gets warm if I run it on high all the time, I took the pigtail apart cleaned the terminals and then put high temp silicone on the back side of the pigtail opposite the plug in to the motor, did the same on the reverse end or the plug where it connects under my...

Let it ride? Sent from my VS910 4G using EO Forums mobile app

Got all repairs done, back in service and let the waiting begin! Slidell La -_- Sent from my VS910 4G using EO Forums mobile app

We had some repair issues that needed addressed so we took this last five days off, got to see the French quarter and some great areas this holiday weekend! Sent from my VS910 4G using EO Forums mobile app

I don't think by law you can run hazardous with a sleeper like that? Sent from my VS910 4G using EO Forums mobile app

The trucks I just mentioned had a pass through with a flex seal between cab and sleeper Sent from my VS910 4G using EO Forums mobile app

Tst or express one up in Michigan next to the detroiter had several box trucks for sale with the sleeper built into the cargo box area, I don't recall the build setup but they were refurbished pensky Internationals!

Slidell it is, semi kicked some debris up and spidered my windshield, much better area then laredo was Sent from my VS910 4G using EO Forums mobile app

Delivering just outside New Orleans and was wondering where to head to to await a next run, first time we've been down here and thought some more veteran guys could give a suggestion! Sent from my VS910 4G using EO Forums mobile app

My m2 does the same thing, I just replaced the evaporator coil, condensor and it would freeze up from time to time, I took the cab filter door off and found debris blocking the drain hole, cleaned out the drain tube and seems to be working better now Sent from my VS910 4G using EO Forums...

I need to learn Spanish :confused: Sent from my VS910 4G using EO Forums mobile app

Ta laredo is looking like normal 12 plus straight trucks in the front lot :( Sent from my VS910 4G using EO Forums mobile app