Recent content by The Enemy

Some of the best advice I can give to a potential fleet owner is to learn the business yourself first before hiring drivers/buying more trucks. If you are buying a used straight truck, make sure you have money reserves for major repairs when they are needed. A minor/major repair isn't going to...

Mercedes Benz doesn't have to redesign anything. They have had the single wheel 3500 Sprinter in the European market for a few years now. It uses a standard front wheel, but they use a wider rear wheel for the back axle. The single wider wheel is narrower than the dually wheel setup, but has...

The food is not only better taste wise, but its much much healthier than the truck stop or many other restaurants out here on the road. I am blessed to have her as my personal chef.

No beer while I am in service and since I only go OOS when I'm at home once every few months, let's just say few and far in between cold beer. We started out with a Sprinter so I know what you mean. I am enjoying the life of luxury now.

We checked all of the places we could think of online, prices ranged from $1295 to $1799 for my model. On top of that shipping was $120-$199 for the unit. Rv dealers price was on average about $1599 plus installation. Bolt custom sleepers (Bentz Sleepers) who designed this sleeper can install...

Thanks for the info on the Truck fridge. After looking at their site the direct replacement model for our truck is $1395+ shipping. We want one that fits the same hole that the Norcold is in, that way we don't have to modify the sleeper. Bolt sleepers has the direct replacement Norcold for less...

Just to answer some questions .... The fridge has a manufacture date of 06/09/08. When we pulled the unit out of the cabinet there was dust on top of the unit, but the coils on the back barely had any dust on them. Besides the two rows of coils, all we can see is the compressor and the...

Turtle, you actually made me lol. Considering I am the one who wrote the story, submitted the photo and nominated her, I know it wasn't a dating site. I mean come on its a link to Overdrive Magazine. If folks would take the time to click the link and actually read the article, they wouldn't...

John, I'll stop by, but only for the free candy.

Zorry, isn't this yours?

We use a memory foam mattress, still get a little bouncing, but not as much as an interspring mattress. I also use ear plugs to help drown out the noise. My wife uses ear plugs and found a real comfortable padded sleep mask to cover her eyes. Try to cover your sleeper windows and close the...

Depending on your misdemeaners, FECC might not accept you. I would check with them first.

All the belts are good, since i replaced the frayed one to the alternator. The safety switch is zip tied/bypassed. It has the metal cooling tank. The error is a Charging Battery Fault, wich leads me to beleive there is eith a short in the Alt or a short in the speed sensor. But seeing as the...

Yes, the pulley did spin when the belt was off.

Hey folks, we have a 2007 Sterling with a 960 Bentz sleeper. The truck is equipped with a RigMaster APU and a Magnum industries power inverter. This morning we woke up to the inverter alarm going off and the display read "Battery Charging Failure". The APU shut itself off. After removing the...