Recent content by Scooter 7190

  1. S

    Not regening while driving 2019 Hino 268

    another question i forgot to ask, that is in line with the different modes. Does the 7th injector dosing fuel will driving?? Because it went through the different modes when driving and it seemed like it got stuck on 21 ( same as manual regen) and then dropped to a lower number
  2. S

    Not regening while driving 2019 Hino 268

    thank you guys!! I went for 20 minute drive, the other day, it was showing the in progress in orange at every stop sign or light, then i pulled over to let it finish, because it seemed to me that it was taking longer than before ,when i did this on other trucks. The in progress message went away...
  3. S

    Not regening while driving 2019 Hino 268

    A flower company delivery of flowers
  4. S

    Not regening while driving 2019 Hino 268

    yes during manual regen soot level drops and no bars on cluster. While driving and soot level set by me to 2.3 , It showed on cluster that a regen was in progress every time you came to a stop, and temps went to low 900 range, but after about 20 minutes of driving i stopped to see if it would...
  5. S

    Not regening while driving 2019 Hino 268

    Truck will do a manual regen with DX program, but today I set soot to 2.3, 3 bars on instrument cluster. Drove it to see if it would do a successful regen driving, with DX Program hooked up. Temps at DPR got up to 950 IN and around 900 OUT. Said on cluster that regen was in progress, it ended...
  6. S

    2019 HINO 268

    thank you for your help I got another question, lately we have been having a bunch trucks, mostly 2018 268 conventionals. These 2 codes kill us on come backs P04DB crankcase breather code, and P0101 air flow sensor code. We have either replaced and or cleaned egr cooler and egr valve on...
  7. S

    2019 HINO 268

    How would you, go about inspection of SCR. Do you take everything apart, or use a scope?? Then what are you looking for?
  8. S

    2019 HINO 268

    5PVNJ8JVXL5S78228 — this one has had long history of code and just went to dealer and they replaced NOX sensors again, they were replaced before as well as the DEF injector . Hasn’t been back yet Just have another this morning, this one doesn’t have history of the code yet, 5PVNJ8JR7L5S51958
  9. S

    2019 HINO 268

    Hey greasyshirt Anything new on this code P2BAE. We continue to have trucks coming back with this code Thank you
  10. S

    2019 HINO 268

    You have anything showing this guidance? We had sent one to dealer and all they did was replace def filter.
  11. S

    2019 HINO 268

    P2BAE code , has history of this code, def dozer , nox sensors and def tank sending unit have been replaced recently. Any info, would be appreciated
  12. S

    2016 hino 268 turbo actuator connector

    Can you add a picture of it Please
  13. S

    2016 hino 268 turbo actuator connector

    the brown connector for the turbo actuator, so the connector that you would plug into the VNT actuator, 8 pin connector
Top