Recent content by curiousmario

Hey everyone.. Have a 2010 hino 268, turbo went out while going empty on small incline changing 5th to 6th gear I hear a weird noise and completely lost power, took next exit to inspect and turbo was jammed up. We bought a rebuilded turbo from our regular provider, put it on, started smoking...

I own one my self and I love it, although they don't sell that good as there are no many mechanics to work on them and parts are a little hard to find. I ended up buying all manuals, body builders books and software for this truck as it is extremely difficult to find someone on the road that can...

Good afternoon y'all I'm getting frustrated with a 2008 Hino 268 as it's not communicating with DXII or any other OBD. I've used the USB nexiq link and nexiq link 2 with DX2 on two other trucks and they connected just beautifully, also tried 4 other OBD readers and they will pull the codes...

Thanks a lot for the ideas and knowledge

Hey everyone I'm having a hard time trying to connect to a UD 2600. I'm using ptt and nexiq USB link. Software does concerts to truck and pull out vin and chassis number BUT does not allow me to select the right engine type (GH7) Any ideas?

Thanks I just ordered. Forgot to mention that exchanging the old actuator to the new turbo worked. I guess the new actuator was bad from factory but the truck is running fine now

I'm really thinking on buying the DX3 and the PTT ( I own hino and UD), BUT! would just any OBD2-USB adapter work or is there an special one I need to use for the software to work? (I have 9 pin to OBD2 adapter)

Yesterday I was playing around with it and probably not the best idea but I was suspecting that the new turbo had issues, sooo I disconnected the actuator from the new turbo (didn't remove it just unplugged it) and connected it to the old turbo (just bringing the old turbo close enough to be...

Thanks for the info. I'll be checking on it tomorrow, but this truck had a delete when I bought it, so EGR shouldn't be there, right? Would you think is possible something related on the delete? Although that code was not there before replacing the turbo

Fuel pump replaced and code went away BUT thus truck is not giving me a break it looks like that was not the issue with loosing power. I still have code U1123 and truck goes into limo mode, not going over 50mph revs not going over 1700rpm. So far we have checked the grounds, batteries...

Good afternoon everyone I'm having issues with a 2010 Hino 268 loosing power. After a few minutes check engine light with come up and truck limited to 2500rpm and 50mph on flat. Once I start going up hill (even empty) it won't go above 25mph. So far I have replaced fuel filter, checked the...

Update: Hose compressing got resolved by replacing the turbo.

Unfortunately this truck does not have a boost gauge. Thus morning I checked and only two active code are P0087 and U1123 Running out of ideas

Yes. So the turbo was replaced again and it finally started running fine. But I'm still having a bad time with the p0087 code... The truck was sitting for a few months until we decided to buy another turbo and give it another shot. Once the new turbo was on it started running like a champ...

I'm currently waiting on the new turbo to arrive. Air filter and intercooler has been replaced but still the same. Hopefully turbo (although it boost) it's the problem. I'll let you know