Search results

It's cool enough, just not enough airflow, same with heat. It seems that I remember seeing many complaints about this on these trucks in various places on the internet. Although I did notice that there seems to be warm air coming from the vent directed at the floor on the drivers feet.

Does anyone know if it is possible to install a blower motor that will put out more airflow than the stock one. Mine is a 2007. There is just not enough airflow coming out of the vents. I have cleaned the inside and outside filters and that did help some, but I think the motor or fan is just too...

Ate the tow bill and the dealer has it and says that the actuator is bad and it needs a new turbo. He says they plugged in a new actuator and the light went off. Could this be a stuck actuator that needs antiseize that you mentioned in the past??? Turbo is $2600 + $240 install kit and labor and...

Interesting that you mentioned that, there was some light rain off and on during the drive down. I have been in some pretty hard rains in the last week, but it's a possibilty. Thanks

Hey GTS my '07 268 7.7L/Allison turned on the check engine light and went into safe mode after I stopped to unload and restarted. I drove about 5 miles at 25mph then I checked all fluids including transmission. Disconnected the battery cable and added 1 quart of atf. Still no power. Limped back...

After comparing the drawing from the Hino manual and the actual picture at Rock Auto I would say definitely maybe. They sure look alike but I can't get any of their numbers to cross to a Bendix 4152206. By the way, I think the front shocks are Gabriel # 83140 also. Found them for $35 each online.

Downloaded a service manual from Trade Bit for $30,(Hino is about $500) highly recommend it if you work on your own stuff like I do, and a Hino quick reference guide(free) which shows alot of part numbers. Looks like the shoes are a common 9" x 3" #4152206 and I found them online for $54. Yay...

I'm in the Kansas city area. There are 2 dealers but you know how that goes. I thought there might be someplace on line that would be more reasonable.

Found it! If anyone needs to know.....Inside the cab take 2 screws out of the plastic trim around the brake handle. Remove the clevis pin, loosen the locknut on the end of the cable and turn the u shaped bracket. Unfortunately I have very little shoe left, almost out of adjustment, and I will...

Is there an adjustment on the parking brake cable of my 2007 model 268? Hydraulic brakes and automatic. Thanks!

I just read the whole thread since I bought an '07 268 automatic yesterday. I have maintenance questions. I do my own since I have never been happy with any shop I have used in the 4 years I have been doing this! Even a simple oil change can't seem to be performed around here. My truck has 280k...