Search results

So its been a while here is my findings running my ghetto fuel system the hino software you can check pump pressure desired and actual and it turned out that the pump after a while of running couldn't keep up so i put a pump on it problem solved . still didn't seem 100% so i looked at egr cooler...

I allways end up fixing someone else's junk

Haha 4l60e good old sun she'll might as well put 13 vane pump in too I usually install a gill younger special trans go shift kit prevents that dreaded 1870 slip code

My favorite good Ole 4700

Could just light the rag and solve my problems lol isolation of water separator filter housing and tank getto fuel system

The filter inside pump

Yes it has the check ball I cleaned it it seems to be in good working order the fitting that screwed into the pump that you have not had off has a little filter screen in it that looked new

That's how th intake came out with needle scaler

Oh yeah I forgot the fitting on back of the pump I didn't notice a oring or a sealing washer on it where it screws into pump the banjo Han sealing washers but not the fitting that screwed unto pump what is suppose to be in there ?

The turbo is not pushing oil looks good didn't get the chance to spend any time on it today so we will see what happens tomorrow

Well emptied fuel tank there is some :censoredsign: in there not much though I found a chunk in one of the elbows the separator had some stuff in the bottom of it removed the hose and line blew them out seem to be free flowing the little filter in the banjo fitting in the pump was spotless I blew the...

No definitely not a driveline noise it's either back of engine or front of trans maybe even lockup plate in converter I'll use my allison program to see if it happens when lock up comes in I appreciate you're help it's good to talk to someone that has a clue

Also I did pull the intake off and clean everything it was clogged solid almost blocked off intake ports what a freaking mess but I used a needle scaler and that stuff came right off bought each cyl up to TDC and cleaned all carbon out of ports with air blower and needle scaler good solid hour...

its a 08 258 rollback tow truck it does have an air compressor hyd brakes yes i have hino dx software yeah its not a common noise ive heard before like the whirring noise of the bad turbo just didnt know if these turbos made a different noise then others i guess rods mains wrist pins turbos all...

Sorry bout that i just found this forum and joined today posted a question and then did a search and i don't like repeating myself as im sure you don't either so im going to check lines elbows banjo fittings water separator and tanks for debris ill try the 5 gallon can fuel system to but im...

Hi i have a 2008 Hino 258 its trowing a p0087 i have change the fuel filter and the scv valve already and still same thing truck has 378000 miles my buddy has a 100 of these j08e engines in his ud's and hino's and he has never changed a high pressure pump don't wanna throw a pump at it the...