Search results

I am told by my mechanic that I need to replace the tranny ECM on my old fl-112 2004 with eaton -fuller auto shift...checked on new one it is almost 2k at freightliner and he says that we are supposed to replace the harness with it...any ideas?? Part # K4195 thanks frank

My shop tells me I have a seeping freeze plug that needs replaced..i will do this but since its such a pain to get to should I have them replace all of them or not? Anyone have experience with this engine?? thenks Frank

I know I saw something on here somewhere about some dealer in Iowa putting out a new Volvo expediter with an ARI sleeper tval type equipped but I cant find the info again to save my life...can anyone help?? thanks frank

Just kicked on a/c for first time this year. compressor running, clutch is engaging,air wasn't cool so checked charge, needed a little Freon so I brought it up to normal level but still no cold air. what should I check next??

Yesterday afternoon get a load offer while we were inbound on a load delivering in Lavergne,tn..it was a less than 75...done it before many times so accepted and got it. 1 HOUR LATER get a c-link telling us we have been taken off the pre-d because another truck was somehow checked out of the...

I posted this in gen. forum but just in case some of you dont go there...do any of you know of locations where i can get my aluminum wheels redone...need resurfaced and polished bad...thanks ...frank

can anyone tell me the location of companies that refurbish and polish aluminum wheels???

Has anyone ever used the Dura=Seal products that seal head and gasket leaks? Want to try them if they really work.

I am losing coolant,,strange thing is not all time ,,one time it will be down a gallon, then drive a thousand miles and still full..the fuel mileage around 9.5-10mpg,but just had oil analysis and it says some coolant in oil,check for leaks and retest...any suggestions? btw--2004 fl-112...

Anyone going to the truck show in dallas next weekend? we were unable to make expediter show, so going to try to make this one. frank

Anyone using a trip pak scanner to send in their ppw? If so how is it working out?

I just had a new head and head gasket replaced as well as the surge tank for coolant was leaking so replaced it and the cap....no leaks, etc. but was still running a little warm when at road speed with a/c on...by warm i mean 180-190 without the fan coming on...took it back and they told me i...

I have a 2004 f-112 with mercedes mbe-4000 series...lately it is getting 20-30 degrees above normal but not at idle only at road speed and worse if a/c on..have to run fan to keep it in norm range....what might this be? thanks frank

ANYONE KNOW WHERE i CAN GO TO BUY LOAD LOCKS OTHER THAN ORDER ON LINE?? THANKS FRANK

Batteries tested, elec. system checks ok, alt.etc. ok, all cca on batteries good,but when i sit two or three hours truck drains just below starting ability. when i run rigmaster it sometimes keeps up, other times shuts down due to charging failure or low voltage. even when i turn everything...

Can someone please post the highlights of the conference call with Jason? We were up in Canada all day on a load and couldnt listen. thanks...frank

I have an 2004 FL-112 with a mercedes 900 series engine. When you turn on the key you have to wait for the computer to click and then the gauges to go all the way right then back down , then you can turn the key to start it.(normally). now when you turn the key it does not click nor do the...

I have lost my power for some reason, it still cruises at 65mph just fine but little to no response when you try to accelarate off a ramp or pass. I just put anti-gell in last week and seems to have done something??? maybe?? what else could it be. Have fl-112 with MBE 4000-435hp 10 speed auto.

Anyone been checked in Cananda to see if they have the speed limited to 65mph?? Anyone caught and ticketed?? just curious. frank

I just got my truck out of the shop aNd one of the things i had them check was for an air leak. I lose most of my air on the secondary gauge when i park and shutdown the engine and lose even more when they run a forklift on to load me...i have to let it build back up before i can move...