Recent content by eporter801

  1. E

    Weight distribution ?

    It's pretty simple to figure out how your weight is distributed between your axles. Let's imagine you have a 10 foot load that weighs 10,000 pounds. Let's also assume that your load isn't heavier on one end than it is on the other, meaning that it's own weight is distributed evenly among it's...
  2. E

    Frozen Lift Gate??

    Anyone have advice on how to unstick my frozen lift gate in the freezing cold? Works fine otherwise. Sent from my iPhone using Tapatalk
  3. E

    HELP - Sterling headlamp/gauge cluster

    SOLVED: The problem got worse and worse the farther south we travelled, so I figured it was probably related to temperature. After being told the shop in Oklahoma had an hour wait to even look at it, I decided to go hunting myself. Found out that both headlamp circuit breakers (in cab and under...
  4. E

    HELP - Sterling headlamp/gauge cluster

    I will check the harness and replace the switch after we drop this load. Even if it's not the switch, it wouldn't hurt to have a new one at such a high mileage. Thank you very much for your suggestions. I'll report back later tonight. Sent from my iPhone using Tapatalk
  5. E

    HELP - Sterling headlamp/gauge cluster

    Should add that daytime temp has been a consistent 99°F. Sent from my iPhone using Tapatalk
  6. E

    HELP - Sterling headlamp/gauge cluster

    2007 Sterling Acterra, 867K miles - At first, driving with highbeams on for extended period of time caused all headlights and gauges to become inoperative without warning. The only way to correct the problem was to hold the highbeam switch back for 15 to 20 seconds. After this short holding of...
Top