Recent content by Bruno De Sousa

  1. Bruno De Sousa

    2008 Hino FD Series 500

    Can somebody help please???? greasytshirt FlyingVan
  2. Bruno De Sousa

    2008 Hino FD Series 500

    Hi, I hope that someone can help me with this one, I don't know how else to describe it but I'll be driving my truck and the engine seems to cut out for a split second at any speed while my foot is on the throttle, and then continues to run normally. It never stalls, it just has a hiccup. I...
  3. Bruno De Sousa

    Hino FD 2008

    Hi, The passenger electric window stopped working all of a sudden but the drivers side window still working fine. Can anyone tell me what the problem might be? Thank you greasytshirt, FlyingVan can you help please Cheers
  4. Bruno De Sousa

    Hino FD 2008

    FlyingVan, greasytshirt can you guys help?? Cheers
  5. Bruno De Sousa

    Hino FD 2008

    Hi, The passenger electric window stopped working all of a sudden but the drivers side window still working fine. Can anyone tell me what the problem might be? Thank you
  6. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Fuel Level Sensor was the culprit!! I just connected both wires and the gauge went right up to full. You guys are really good, I’m impressed, right on the money again. I love this website!!! Took me a bit to understand what actually had to be done but FlyingVan made it cristal clear. Thank you...
  7. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Thank you FlyingVan, Connect both wires with the truck running, right?
  8. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    where Do the wires that leave the fuel sensor on the tank connect to?? It’s a long wire that seems to go under the cabin somewhere?? If I could find where those wires connect to I could unplugged them as well to see if the gage will swing back up.
  9. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    I unplugged the wires that connect to the top of the sensor on the fuel tank but the gage remains at E???
  10. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Where’s the harness connector located?
  11. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Hi greasytshirt, I don’t mean to be a pain in the butt but it’s the fuel sensor, the small round part that’s bolted to the top of the fuel tank? And if so, all I will need to do it’s, unplug the sensor, unbolt the part and replace it with a new one, correct?
  12. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Any suggestions anyone?? Greasytshirt Coalminer
  13. Bruno De Sousa

    Hino FD 1024, 500 Series 2008.

    Hino FD 1024, 500 Series 2008. Hi guys, This morning I filled up the fuel tank but the fuel gage on the dashboard remains at E, empty, Any suggestions to what might be causing this fault???
  14. Bruno De Sousa

    Hino FD 2008

    Hino FD 1024, 500 Series 2008, Today, I filled up the fuel tank but the fuel needle on the dashboard remains at E, empty, why??? coalminer, greasytshirt any suggestions to what it might be the problem???
  15. Bruno De Sousa

    Hino FD 2008

    Hello fellas, I’ve got some news, coalminer & greasytshirt, you guys were right on the money, I had the SCV replaced but I also had to replace the, FUEL PRESSURE SWITCH AND PRESSURE LIMITING VALVE. Now she runs really smooth again . Thank you guys for the mechanical knowledge and expertise you...
Top