Sign up for The Wire Newsletter!

Hino rear main seal

Discussion in 'Hino Trucks' started by zackcts, Feb 11, 2019.

  1. zackcts

    zackcts New Recruit Mechanic

    Joined:
    Feb 11, 2019
    Messages:
    1
    Trophy Points:
    1
    Ratings:
    +0 / 0 / -0
    hi guys have a 2008 hino fg engine has been pulled out as rear main seal is gone wanted to take bellhousing of to replace the seal properly and remove it but the head is bolted to top of housing and dont really want to remove it just for the 2 bolts
    is their any other way to replace this seal with out removing bell housing and head cheers
     
  2. greasytshirt
    Dr Pepper Addict

    greasytshirt Moderator Staff Member Mechanic

    Joined:
    Dec 3, 2013
    Messages:
    2,171
    Trophy Points:
    220
    Ratings:
    +734 / 0 / -0
    There's a factory tool for replacing the rear main seal, and using it is the only way to ensure that it gets installed at the correct depth.

    You should be able to remove those bolts to remove the bellhousing.
     
    • Like Like x 1
    Loading...

    Share This Page