Sign up for The Wire Newsletter!

HINO BRAKE SENSOR

Discussion in 'Hino Trucks' started by zenn7, Jan 24, 2018.

  1. zenn7

    zenn7 New Recruit Owner/Operator

    Joined:
    Aug 18, 2017
    Messages:
    11
    Trophy Points:
    5
    Ratings:
    +1 / 0 / -0
    Can anyone enlighten me about the system re. the wear sensor for the rear disc brakes on a Hino 195.
    so- is this as complicated as the 20 ,,,,,,,dollar cable that plugs into the brake pad and is often disabled by twisting the two wires together,, to fool the light on the dash?
    Or.. If someone told you there was a 500.00 repair kit- might they be pulling your leg? How about 1.5 hours of labour to install this magic in a box?..
    thx
     
  2. greasytshirt
    Dr Pepper Addict

    greasytshirt Moderator Staff Member Mechanic

    Joined:
    Dec 3, 2013
    Messages:
    2,152
    Trophy Points:
    200
    Ratings:
    +720 / 0 / -0
    I can't find the wear sensor installation in the book. Granted, I spent about 3 minutes looking. I did find them in the wiring diagrams. They're in a series circuit, so you can splice them together if they are worn through.

    Sent from my XT1585 using EO Forums mobile app
     
    • Jean

      Jean New Recruit Owner/Operator

      Joined:
      Sep 3, 2017
      Messages:
      5
      Trophy Points:
      1
      Ratings:
      +0 / 0 / -0
      Morning sir, regen stops after 5 seconds pulled out spark plugs from burner to clean and they were wet, orange hose from inter cooler has oil coming out any suggestions?
       
    Loading...

    Share This Page