Sign up for The Wire Newsletter!

Hi all! how to start the hino engine after the head gasket replace?

Discussion in 'Hino Trucks' started by Moth, Jan 8, 2019.

  1. Moth

    Moth New Recruit Driver

    Joined:
    Jan 8, 2019
    Messages:
    3
    Trophy Points:
    1
    Ratings:
    +0 / 0 / -0
    hii

    I have 2010 hino 268 with 300k M , I changed the head gasket for my truck .. everything is in place, but I do not know why the truck does not work, it seems to me that the problem is not getting fuel into the engine,

    How can I start the engine?

    Thanks ...
     
  2. Hino123

    Hino123 Active Expediter Researching

    Joined:
    Dec 26, 2016
    Messages:
    128
    Trophy Points:
    50
    Ratings:
    +34 / 0 / -0
    It could be a lot of things. If you suspect no fuel, crack a fuel line at the injector and crank it several times until you
    see fuel running out. Make sure you re-connected the camshaft sensor when you had the head off,and double check your timing. Good luck and report back if you get it running.
     
    • Like Like x 1
    • Moth

      Moth New Recruit Driver

      Joined:
      Jan 8, 2019
      Messages:
      3
      Trophy Points:
      1
      Ratings:
      +0 / 0 / -0
      Thanks Hino123
      I’v Seen the fuel running out
      I tried with starting fluid But the engine still not ruuing
       
    • Moth

      Moth New Recruit Driver

      Joined:
      Jan 8, 2019
      Messages:
      3
      Trophy Points:
      1
      Ratings:
      +0 / 0 / -0
      The engine is working now
      Thanks
       
    • Hino123

      Hino123 Active Expediter Researching

      Joined:
      Dec 26, 2016
      Messages:
      128
      Trophy Points:
      50
      Ratings:
      +34 / 0 / -0
      What was the cause of the no start? Just curious.
       
    Loading...

    Share This Page