A/C question

sthomas5212

New Recruit
Owner/Operator
The a/c blows out the floor vents and won't switch back to any other setting. Any info you can give me would be great appreciated..

Thank you
 

greasytshirt

Moderator
Staff member
Mechanic
There are three cables attached to the controls. They go to three different door controls. Make sure they're all attached and not bent up, and that everything is moving through it's range of motion.
 

sthomas5212

New Recruit
Owner/Operator
Thanks for your response! Where are the cables located and how hard is it to get to them? Can they be reached without removing anything?

Thank you
Stacey
 

greasytshirt

Moderator
Staff member
Mechanic
You need to remove the bezel that surrounds the radio and stuff. It just pulls off. This gives access to the HVAC controls. Then remove the panels across the bottom. There's a couple push pins and 10mm bolts. With some of this out of the way it will be easier to see.
 
Top