No sir you must be mistaken, I have replaced condensors, removed debris from condensors but have never relocated one. I usually make sure the liscense plate is not blocking the small opening under the condensor. I also usually recommend if you idle your truck alot to bump the idle up to 980, using the high idle knob (2014 and down), or bump it up with the cruise control (2015 and up). They do not get alot of air flow on the 2011 and up models due to relocating the condensor lower on the CAC/Radiator assy,so fan clutch operation and restrictions are two biggies to look for.Mr. Hino123. Didn't you relocate the condenser on a Hino truck and say it was great even in Florida. I thought I saw your post but now I can't find it? Can you send it to me. Thanks.
It sounds like one of the blend doors is in the wrong position.When my a/c is running the vents on the bottom of my dash have hot air coming out. a/c had a bad switch and has been replaced. I can't figure out how to stop the hot air. Any suggestions?