Search results

  1. jeffcarl

    2018 Hino 155 Heater Core

    Thank you again GT. I found a good used one for $200, I'll get that coming. When I take something like this on I take lots of photos. Really appreciate you sharing your knowledge with me. Much obliged. Best Regards!
  2. jeffcarl

    2018 Hino 155 Heater Core

    Well it has not been a good month for my Hino trucks. It must be ":censoredsign: happens" month here.. My 155 truck got a nice whack on the nose yesterday, coolant pouring out all over the place. I bypassed the heater core & topped off the coolant, no more leaking. So I need to replace the core. I am...
  3. jeffcarl

    2013 Hino 338: Oil Cooler & Filter Housing

    Thanks for your help!
  4. jeffcarl

    2013 Hino 338: Oil Cooler & Filter Housing

    Also, does the alternator have to come off too? Other stuff? I was trying to tackle this with my own forces, but it may be too much at this time.
  5. jeffcarl

    2013 Hino 338: Oil Cooler & Filter Housing

    I have the manual with that page. My dealer also said that they usually replace the whole assembly. Is the turbo removal a difficult task?
  6. jeffcarl

    2013 Hino 338: Oil Cooler & Filter Housing

    Thank you for the reply. Do you mean then that the problem is probably not the cooler itself but the d-rings?
  7. jeffcarl

    2013 Hino 338: Oil Cooler & Filter Housing

    Radiator was leaking a bit, so I topped it off. Ran it up to temp & stopped to look for leaks, Found oil pouring from the radiator overflow. Dealer said it's the oil cooler and not an uncommon problem. I'm trying to get the filter housing/oil cooler off and it looks like the turbo has to come...
  8. jeffcarl

    2013 Hino 338 Injectors

    Hino finally offers reman injectors for around $370 each. It's a tough call whether to keep them or bite the Hino bullet for their reman units. My dealer here in Rochester is very good to me, but there's only so much he can do.
  9. jeffcarl

    2013 Hino 338 Injectors

    Thank you Coalminer. Were your replacement injectors Denso or knock-offs? Mine are in Denso labeled boxes, but I strongly suspect they are China knock-offs.
  10. jeffcarl

    2013 Hino 338 Injectors

    I purchased a set of Denso injectors from bigmachineparts dot com last week, $240 each, part #095000-6593. Sold to me as genuine Denso parts. They arrived in what appear to be Denso OEM packaging. They also have the red printed paper advising the necessity of registering each injector to the...
  11. jeffcarl

    2013 Hino 338 Injectors

    Hello fellow Hino drivers. My 338 needs injectors at 210,000 miles, the OEM replacements are really expensive. Has anyone found an aftermarket injector that's good? Thanks jeff
  12. jeffcarl

    Problems with 2015 hino 155???

    I bought a Hino 155 in 2017 for my cabinetmaking business. After looking at the Isuzu and the Hino it was and is my considered opinion that the Hino is a better built truck. My 155 has had no unusual service requirements and never gives me any issues, but because we run it 90% local there's not...
  13. jeffcarl

    J08E Injectors & DPF

    Found injectors online from a manufacturer going by the name of ERIKC. Little doubt they are China made. Even though they are very affordable (read that as cheap), I am not inclined to use them unless someone has a positive experience. Anyone know about ERIKC?
  14. jeffcarl

    J08E Injectors & DPF

    Anyone give me an idea on what the cost should be to do new injectors & the DPF? The test was done & I am given to understand that the injectors failed. The DPF may clean up but they won't know that until they get into it. Consequently I'm looking at a worst case scenario cost. Any input...
  15. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    CORRECTION: 5PVNV8JV. CORRECTION: No, springs in the back. Air brakes only. Thanks jeff
  16. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    Originally Posted by jeffcarl Hello again Mr GTS I have a self-inflicted problem: the box I put on my cab & chassis is too tall to back into my building. I have 11R22.5 tires on it. My rear axle is 21,000 lbs, tires are plenty capable. Now here's the questions: Can I use...
  17. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    Hello again Mr GTS I have a self-inflicted problem: the box I put on my cab & chassis is too tall to back into my building. I have 11R22.5 tires on it. My rear axle is 21,000 lbs, tires are plenty capable. Now here's the questions: Can I use 225 (or 255) 70R-22.5 tires? That would reduce my...
  18. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    Low Pro tires: will 275/80r 225 tires have a negative impact on my 338? Can my dealer program my speedo to correct for the smaller diameter tires? What will the impact be on rpm at cruise with the 6 speed Allison?
  19. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    My new (to me) Hino 338 update. After searching for a few months I bought a 2013 with about 60,000 miles. Came to me as cab & chassis. From NYC to Rochester NY it gave me 12.8 mpg; not too bad for a 33k truck, but no box yet. Just putting it in service today (4/21/14) with a 25' box. It...
  20. jeffcarl

    Big Truck I work on Hino trucks. I'll answer any questions I know the answers to.

    Hellow GS I tried to send you a PM, can't tell if it went through or not....get anything from me? thanks jeff carl
Top